volare steering box (power)

any one know what the fitting in top of pressure side is called
I need to make up hoses due to lack of room under d/s motor mount
I know its 5/16 but its not an inverted flare it has a shoulder and o ring I think
I need to make up a super tight 90 bend to clear mount
thanks  

on a 76 volare steering box.. the thread sizes are

Steering Gear (Power Steering) Part Number: 7509   Alternate Part Number: 9602
Inlet Size: 1/2 X 20  
Outlet Size: 3/8




the right end of both of these are the Oring...



there are some hydraulic hose shops that might have a right angle adaptor for this..

some Napa stores create power steering hoses from scratch..  

thanks for the info now to search and find one  

try to find some auto parts store that sells an OMEGA power steering hose part number 805...  it has a short bend probably 45 degree for the oring end..   its NOT a factory design hose...     you might be able to clear your motor mount with it..

this is a special hose made by Omega...   don't let them cross it with another brand...   there are pictures of it online... google 805 omega  power steering hose..


i found a LOT of 5/16 male O ring tube fittings. but with either 9/16 thread or 5/8 thread.. NOT 1/2 inch thread..

can you stick a open end wrench over the threads if you have the hose end off... see if a 1/2" open end wrench fits.. or a 9/16 or a 5/8.. this is on the Oring threaded ends.. ..

u can give me a hint of where on the planet you might be.. or what parts store chains are local to you..