|
Num Posts
Sort Order
|
cgbrown
New User
| Posts: 2
| Joined: 09/08
Posted: 09/04/08
10:05 AM
|
|
I have a 69 C10 with a 350 and want to convert to a
502 big block. Will I need to change motor mounts and
what will I need if so.
Thanks much
Charlie
|
|
Posted: 09/04/08
12:22 PM
|
|
Yes.
|
cgbrown
New User
| Posts: 2
| Joined: 09/08
Posted: 09/04/08
01:34 PM
|
|
Thanks John. Do I just order big block mounts for a 69?
|
|
|
|
Posted: 09/04/08
05:02 PM
|
|
Charlie,
No it nots quite that easy, but it is an easy swap. You can scrounge up used mounts from a wrecked big-block truck, maybe try Tucker's in Las Vegas, or for new parts call CPP, LMC Truck, Brothers, No-Limit Engineering, Tucker's, You might be lookiing at changing the trans mount on the rear crossmember, maybe even go to a tubular crossmember. Exhaust will have to be changed. There's a few more little things. That's enough to get you going. Any of these businesses will be glad to fill you in with more info. I've gotta finish a story for the November issue, good luck!
|